Instructions
Quick jump to:
- Solids
- Liquids
- Plant Materials
- Synthetic Cannabinoids
- Surfaces
- Amphetamines
- Solids
- Liquids
- Plant Materials
- Synthetic Cannabinoids
- Surfaces
- Amphetamines
Solids (Tablets, powders, capsules)
- Take a buffer solution bottle from the kit and screw open the large cap.
- Grab a spatula from the kit and place a small amount (1 scoop) of the substance onto the spatula
Note: always crush tablets/chunks into powder before testing - Insert the spatula in the opened buffer solution bottle and stir for 5 seconds.
- Remove the spatula and close the buffer solution bottle.
- Shake the buffer solution bottle for 10 seconds.
- Start the Narco-Sens®.
- Take a sensor from the tube and place it into slot A.
- Open the buffer solution bottle by screwing open the small tip of the buffer bottle with your sample in it.
- Place 2-3 drops onto the "X" mark of the sensor.
- Select the analyzing method: Multi-Drug, Amphetamines, dissolved Cocaine or Synthetic Cannabinoids (depending on which kit you are using) and press "Start Scan".
Click on the video to view video instructions:
Liquids (Drugs diluted in fluids/liquids) GHB - Ketamine
- Take a buffer solution bottle from the kit and screw open the large cap.
- Take a pipette from the kit and transfer 3 drops of the liquid into the buffer solution bottle.
- Shake the buffer solution bottle for 10 seconds.
- Start the Narco-Sens®.
- Take a sensor from the tube and place it into slot A.
- Open the buffer solution bottle by screwing open the small tip of the buffer bottle with your sample in it.
- Place 2-3 drops onto the "X" mark of the sensor.
- Select the analyzing method Multi-Drug and press "Start Scan".
Click on the video to view video instructions:
Plant Materials (Cannabis)
- Take a buffer solution bottle from the kit and open the large cap.
- Place a small amount of the plant material into the buffer solution bottle.
- Squeeze the buffer solution bottle against the plant material so the active compound
- will be extracted more quickly into the buffer.
- Shake the buffer solution bottle for 10 seconds and leave the bottle for 5-10 minutes
NOTE: The fresher the sample, the better the result. (fresher means more active compound) - Start the Narco-Sens®.
- Take a sensor from the tube and place it into slot A
- Open the buffer solution bottle by screwing open the small tip of the buffer bottle with your sample in it.
- Place 2-3 drops onto the "X" mark of the sensor.
- Select the analyzing method Multi-Drugs and press "Start Scan".
Click on the video to view video instructions:
Synthetic Cannabinoids
- Take a buffer solution bottle (light green cap) from the Synthetic Cannabinoids kit and screw open the large cap.
- Insert a piece of the product you want to test into the buffer solution bottle (powder or shredded plant material (light green cap) Powder: 1 scoop of blue spoon, Plant material: 2 full transparent spatula’s
- Transfer 4-6 drops of the buffer bottle (light green cap) into bottle with (dark green cap) (IF THE SOLUTION TURNS MILKY WHITE IT MOST LIKELY IS A SYNTHETIC CANNABINOID!) and shake the buffer solution bottle for 10 seconds and proceed with the measurement.
- Take a sensor from the tube and place it into slot A.
- Open the buffer solution bottle (dark-green cap) by screwing open the small tip of the buffer bottle with your sample in it.
- Place 2-3 drops onto the "X" mark of the sensor.
- Select the analyzing method Synthetic Cannabinoids and press "Start Scan".
Click on the video to view video instructions:
Surfaces (Walls, (suit)-cases, textile etc.
- Take a buffer solution bottle from the kit and screw open the large cap.
- Take a cotton swab from the kit, place it into the buffer solution bottle to wet it and take it out again.
- Wipe the surface you want to test (such as walls, car interiors, textile, tables etc.)
- Place the cotton swab into the buffer solution bottle again and firmly stir the swab so the sample can be absorbed into the buffer solution.
- Shake the buffer solution bottle for 10 seconds.
- Start the Narco-Sens®.
- Take a sensor from the tube and place it into slot A.
- Open the buffer solution bottle by screwing open the small tip of the buffer bottle with your sample in it.
- Place 2-3 drops onto the "X" mark of the sensor.
- Select the analyzing method Multi-Drugs and press "Start Scan".
Click on the video to view video instructions:
You also can test substance residues inside plastic bags and substances impregnated into products such as textile:
Amphetamines
- Take a buffer solution bottle (Orange cap) from the Amphetamines kit and screw open the large cap
- Insert a sample of the product you want to test into the buffer solution bottle (Orange cap)
- Transfer the solution to the other buffer bottle (Red cap)
- Shake the buffer solution bottle for 10 seconds, wait for 10 minutes for the reaction takes place and proceed with the measurement.
- Take a sensor from the tube and place it into slot A.
- Open the buffer solution bottle by screwing open the small tip of the buffer bottle with your sample in it.
- Place 2-3 drops onto the "X" mark of the sensor.
- Select the analyzing method Amphetamines and press "Start Scan".
Click on the video to view video instructions:
There are 4 kits available:
- Multi-Drugs
Use this kit if you do not know what the substance could be or when you think it could be one (1) of the substances in the detection list. (On the Narco-Sens device select Multi-Drugs). The same kit can be used to detect dissolved cocaine in for instance shampoo, liquids, gel, textile etc.(On the Narco-Sens device select Dissolved Cocaine). - Amphetamines
- Use this kit when the substance is negative or inconclusive with the Multi-Drug Kit or if you believe it could be Amphetamine. With this kit, you also can confirm the presence of amphetamines derivatives such as 4-FA, MDMA, MDEA, MDA, MBDB, BDB etc. (On the Narco-Sens device select Amphetamines)
- GHB
Use this kit when you suspect it is GHB (Liquid) (On the Narco-Sens device select Multi-Drugs) - Synthetic Cannabinoids
- Use this kit when you believe the substance (pure or sprayed on dried, shredded plant material) is a synthetic cannabinoid. (On the Narco-Sens device select Synthetic Cannabinoids)
!Important!
- Please read the complete manual carefully (PDF on USB)
- Never re-use the sensors!, Always use a new sensor per analysis.
- Always use a new spatula/pipette to avoid contamination
- Only place 2-3 drops of buffer onto the sensor
- Do not overload the buffer with the sample
- Regularly connect your device to the internet to check for updates
- In case of any problems, please contact your local dealer